TEST Blog Post 2


This user training class is designated to laboraty technicians, beginner users of LECO instruments and consists of right mix of theory and hands-on practice to learn in details how operate the device, perform regular maintenance and basic troubleshooting.

The following topics will be specifically covered during the training:

  • Introduction
  • Theory of operation
  • Software features
  • Daily setup
  • Maintenance
  • Troubleshooting

The User Training programme covers two full days. To make the traveling as convenient as possible for all attendees, we start the training class at noon and finish at noon of the third day.

DAY 1:
Start; 12:00 CET with lunch
End: ~17:00 CET

DAY 2:
Start: 09:00 CET
End: 17:00 CET
18:30 group dinner by LECO

DAY 3:
Start: 09:00
End: 11:00 CET

LECO provides for free:
  • Training material,
  • writing pads and pens,
  • coffee/refreshments during the day,
  • 2× lunch,
  • and group dinner on the 2nd evening.

Participants needs to take care only for their travel!




LECO European Application and Technology Center
Max-Dohrn-Strasse 8-10
Building B 5.2
Berlin, 10589


eatc analytic lab

How to get there by public transport in Berlin:
Station: „Jungfernheide“
Bus: 109, M21, M27, N7 U-Bahn: U7 S-Bahn: S41, S42
Regional Train: RB10, RB13, RB14, RE2, RE4, RE6
From Berlin Main Station ~15 Min. (5.5 km)
Leave the station in direction "Max-Dohrn-Str.", cross the street, turn left, and after about 75 to 100 meters you will see the main entrance of BiotechPark to the right.

How to get there by plane:
AFrom BER Airport Berlin Brandenburg take the Airport Express (FEX) in direction „S+U Berlin Hauptbahnhof“ (Berlin Main Station, 3 stops). At Berlin Main Station take the train RE4 in direction „Rathenow, Bhf" and get off the train at the next stop „S+U Jungfernheide Bhf (Berlin)". The train journey takes about 50 minutes (including train changes).

How to get there by car: (coming from A 115)
1.) At highway interchange Funkturm, take a half right on to A100 exit Siemensdamm, turn right on to Tegeler Weg, turn left (first street) on to Max-Dohrn-Str.
2.) At highway interchange Charlottenburg keep right and turn on to Tegeler Weg at autobahn junction Jakob-Kaiser-Platz, turn right on to Tegeler Weg, turn left (first street) on to Max-Dohrn-Str.
3.) At highway interchange Jakob-Kaiser-Platz turn right on to Tegeler Weg, then turn (first street) left on to Max-Dohrn-Str.

Public parking spaces can be found directly in front of the entrance to BioTechPark.

LECO automatically takes care of a room reservation for the training days for you at:

  • ECONTEL HOTEL Sömmering Straße 24–26 |10589 Berlin | Tel.: +49 30 346 81-0

If you do not wish this or if you would like to change the arrival or departure days, please contact us here. Furthermore, we can recommend the following hotels, which are conveniently located nearby the LECO European Application and Technology Center:

If you need any assistance, don't hesitate to contact us.


Online registration is required. Click the “REGISTER NOW” button on this page and fill in the form. Please note that the user training has a limited capacity. The registration deadline is

25. Oktober 2021





Don't hesitate to contact us in case of any upcoming questions:

Tel.: +49 2161 90233 32


This email address is being protected from spambots. You need JavaScript enabled to view it.